Gypsum Plaster

Product Details:

Form : Powder
Packaging Size :12Kg, 25 Kg, 50 Kg
Grade : 200 mesh
Application : Plaster
Color : White
Purity : 95%
Mesh : 200
Packaging Type : HDPE Bag

Product Details:

The story of Gypsum Plaster started thousands of years ago. The earliest example of usage of gypsum plaster is at the Tomb of Tutankhamun at the Giza Pyramids which was internally lined with gypsum plasters. Today Gyproc’s range of gypsum plaster has replaced sand and cement plaster as the preferred choice for all internal plastering with all leading builders and contractors across India.

Gyproc Plasters offer a full range of specific and multi-purpose solutions for all internal plastering needs and backgrounds. Gyproc plaster products are designed to suit either hand or machine application. Their consistent performance, workability and reliability is assured, thanks to our exacting manufacturing standards, which enable plasterers to maximise productivity and cut product wastage on site

Additional Information:

• Packaging Details: 25 KGS HDPE BAGS

Product Details:

Thermofix GP is a high-quality cement-based adhesive  mixture for permanent fixing of thermal insulation boards  to various substrates such as concrete, masonry and  screeds. 

APPLICATIONS

Thermofix GP is used for:» External and internal insulation of walls, ceilings,  facades and other surfaces. » Fixing thermal insulation boards made of expanded  polystyrene (EPS), and extruded polystyrene (XPS). » Fixing the reinforcing mesh in the thermal insulation  system.

ADVANTAGES 

» Easy to apply.
» Water resistant.
» Frost-resistant.
» Very good compressive strength.
» Very good adhesion strength.

STANDARD

» EN ISO 13494 ETAG-004 (EOTA).
» EN 998-1: 2016.

TECHNICAL PROPERTIES @ 250C:
Colour: Grey and white
Fresh wet density  (mixed): 1.7 ± 0.1 g/cm³
Open time: 20 min
Pot life: 3 hr
Adhesion strength to  the base:  EN 1015-12  ≥ 250 kPa  ETAG-004 (EOTA)
Adhesion strength with  EPS, XPS board:
after 28 days under  normal conditions  after 3 conditioning  cycles  EN ISO 13494  ETAG-004 (EOTA)  EN 1015-12  ≥ 80 KPa  ≥ 80 KPa
Working temperature: 5 to 35oC


EN 998-1: 2016 Requirements
Water absorption:  EN 1015-18 Wc2
Water vapor  penetration coefficient:  EN 1015-19  μ ≥10
Adhesion:  EN 1015-21 ≥ 0.9 N / mm² - FP: B
Thermal conductivity  coefficient:  EN 1745, (λ10, dry) 0.88 W/m.K (tabular value; P = 50%)
Reaction to fire:  EN 1305-1 Class: A1
APPLICATIONAs an adhesive:  Apply the mortar in a strip, on the edges around the  insulation board with a few spots in the middle (3 - 4 points  minimum). In case of a smooth base material, a notchedtrowel can be used to spread the mortar on the back of the  insulation board.

MIXING : To ensure proper mixing, a mechanically powered mixer or  drill fitted with suitable paddle should be used.  6.5 - 7.0 litres (for each 25 kg bags) of clean water should  be added to clean container. The powder is then added  slowly to the water while mixing continuously with lowspeed mixer/drill (400 - 600 rpm). Mixing time should be  continued for 3 minutes until a uniform consistency is  obtained. Leave the mixture to stand for 4 - 5 minutes, mix  again and Thermofix GP is ready for use.

Additional Information:

• Production Capacity: 500
• Delivery Time: AS PER QTY
• Packaging Details: 25 KGS BAGS